Takagi T-H3J-DV Indoor Gas Tankless Water Heater

The Takagi T-H3J-DV is a condensing unit with a maximum of 160,000 BTU and is ideal for most all residential homes.  The T-H3J-DV is a direct vent unit and requires a minimum of a 3/4" gas line. The T-H3J-DV comes set for either Natural Gas (NG) or Liquid Propane (LP). Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm).

The T-H3J-DV is a condensing unit and is very efficient and uses 3" PVC for exhaust venting and for taking it's intake air from the outside.  The T-H3J-DV supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems, and/or domestic & heating applications.  With gas inputs of 160,000 BTU, the T-H3J can produce enough hot water for 1-2 major applications in most areas.

This Takagi tankless water heater is available in Natural Gas (T-H3J-DV-N) and Liquid Propane (T-H3J-DV-P) models. Please see the specifications listed below.

Product Specifications:
Maximum of 160,000 BTU
Energy Star Rated
Energy Factor of 0.95
Maximum flow rate of 6.6 GPM at 35°F temperature rise (5.5 GPM at 55°F rise)
Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm)
Venting with Schedule 40 PVC, CPVC, PP, Category III stainless steel
Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes

For further questions or to order please visit www.globaltowne.com  or call us at 888-726-9752

Takagi-T-H3S-DV Indoor Gas Tankless Water Heater

The Takagi T-H3S-DV is a condensing unit with a maximum of 180,000 BTU and is ideal for most all residential homes.  The T-H3S-DV is a direct vent unit and requires a minimum of a 3/4" gas line. The T-H3S-DV comes set for either Natural Gas (NG) or Liquid Propane (LP). Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm).

The T-H3S-DV is a condensing unit and is very efficient and uses 3" PVC for exhaust venting and for taking it's intake air from the outside.  The T-H3S-DV supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems, and/or domestic & heating applications.  With gas inputs of 180,000 BTU, the T-H3S can produce enough hot water for 3 bathrooms in warmer climates or 2 baths in colder climates.

This Takagi tankless water heater is available in Natural Gas (T-H3S-DV-N) and Liquid Propane (T-H3S-DV-P) models.Please see the specifications listed below.

Product Specifications:
Maximum of 180,000 BTU
Energy Star Rated
Energy Factor of 0.95
Maximum flow rate of 8 GPM at 35°F temperature rise (6.25 GPM at 55°F rise)
Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm)
Venting with Schedule 40 PVC, CPVC, PP, Category III stainless steel
Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes

For further questions or to order please visit www.globaltowne.com  or call us at 888-726-9752