Takagi T-K4-IN Discontinued and Replaced with Takagi TK-310U-I

Takagi has recently announced that the Takagi T-K4-IN Indoor unit is being discontinued and will be substituted with the Takagi TK-310U-I indoor unit.  This substitution will go into effect immediately.  The TK-310U-I model complies with Ultra-Low NOx regulations and has a range of exciting features. Each indoor model includes a remote control as a standard feature. In addition, this model covers both natural gas and propane needs, as it is field convertible with a supplied (LP) conversion kit.  Below are the specifications for the Substitute Takagi TK-310U-I.

Product Specifications for Takagi TK-310U-I:
Maximum of 190,000 BTU
Maximum flow rate of 6.6 GPM at 35°F temperature rise (3.3 GPM at 70°F rise)
.81 energy factor
Includes built-in temperature controller and power cord as standard features
Vents using 4" stainless steel venting
Combustion air taken from outside using 4" PVC.
Field convertible from Natural Gas to Liquid Propane
3/4" NPT water and gas connections
Ultra-Low NOx regulations of less than 14 ng/J (<20ppm)
20.50" H x 13.75" W x 10" D
Weight - 39 lbs
15-year limited heat exchanger, 5 yrs limited parts Residential use
Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes

For further questions or to order please call GlobalTowne at 888-726-9752

Low Stock on Bosch Aquastar 240FX LP (Liquid Propane)

GlobalTowne still has one of the Bosch Aquastar 240FX LP (Liquid Propane) units left in stock.  This unit is designed to be installed inside or outside (with the included top cap).  The top cap must be removed and the unit properly vented to the outside using 4" single wall stainless steel venting. Only install in warmer climate areas as the built in freeze protection is only good for ambient freezes.  The Bosch Aquastar 240FX LP comes with a manual, wall mounting bracket and a Pressure Relief Valve (PRV).  Please call and order soon as we only have 1 unit left in stock!!  Please see below for more specifications.

Specifications for the Bosch 240FX LP:

• 165,000 BTU
• Electronic Ignition (120V Power required)
• Built in freeze protection
• All set for Liquid Propane (LP)
• 3/4" NPT LEFT side water/gas connections
• Combustion air taken from room installed in
• Good for 2-3 showers

Please call GlobalTowne at 888-726-9752 for further questions or to purchase the Bosch Aquastar 240FX LP (Liquid Propane).

Low Stock on Takagi T-K4-IN & Takagi T-KJR2-IN Gas Tankless Water Heaters

GlobalTowne still carries the Takagi T-K4-IN & Takagi T-KJR2-IN indoor gas tankless water heaters.  GlobalTowne is getting low on stock for these units and Takagi will soon stop manufacturing them.   We do still have some stock for these units.  These units are designed for indoor use and need to vented to the outside using 4" diameter single wall stainless steel venting.  Below are more specifications for the heaters.    Please call while supplies last.

Specifications for Takagi T-KJR2-IN:

• 140,000 BTU
• Comes set for either NG or LP
• Indoor Model
• 4" stainless steel venting required
• Combustion air taken from indoors
• .82 energy factor
• 35 degree temperature rise at 6.6 GPM
• 45 degree temperature rise at 6 GPM
• Product Dimensions 20.25 H x 13.75 W x 7.75 D

Specifications for Takagi T-K4-IN:

• 190,000 BTU
• Comes set for either NG or LP
• Indoor Model
• 4" stainless steel venting required
• Combustion air taken from indoors
• .82 energy factor
• 35 degree temperature rise at 8 GPM
• 45 degree temperature rise at 6.4 GPM
• Product Dimensions 20.25 H x 13.75 W x 9.50 D

Please call GlobalTowne at 888-726-9752 with further questions or to place an order.

Takagi T-KJr2-IN Indoor unit Discontinued and Substituted with Takagi TK-110U-I Indoor Non-Condensing unit

Takagi has recently announced that the Takagi T-KJr2-IN Indoor unit is being discontinued and will be substituted with the Takagi TK-110U-I indoor unit.  This substitution will go into effect immediately.  The TK-110U-I model complies with Ultra-Low NOx regulations and has a range of exciting features. Each indoor model includes a remote control as a standard feature. In addition, this model covers both natural gas and propane needs, as it is field convertible with a supplied (LP) conversion kit.  Below are the specifications for the Substitute Takagi TK-110U-I.

Product Specifications for Takagi TK-110U-I:
Maximum of 140,000 BTU
Maximum flow rate of 6.6 GPM at 35°F temperature rise (3.3 GPM at 70°F rise)
.81 energy factor
Includes power cord as standard features
Includes remote control
Vents using 4" stainless steel venting
Combustion air taken from outside using 4" PVC.
3/4" NPT water and gas connections
Ultra-Low NOx regulations of less than 14 ng/J (<20ppm)
20.50" H x 13.75" W x 9.50" D
Weight - 39 lbs
Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes

For further questions or to order please call GlobalTowne at 888-726-9752

3" PVC Concentric Vent Kit for Takagi Condensing Tankless Water Heaters

All of the Takagi condensing tankless water heaters vent to the outside and take the intake air from the outside using 3" PVC or CPVC.  Other materials are also allowed but you would need to refer to the installation manual.  If you are looking to have just one penetration through the sidewall or the roof for your venting then you would want to use the 3" PVC Concentric Vent Kit #196016.  The 3" PVC concentric vent kit can be used for venting out the sidewall of the home or vertical through the roof. This vent kit would be used if venting out a perpendicular wall.

Please call GlobalTowne at 888-726-9752 for further question or to place an order.

4" Stainless Steel Venting for Takagi Non-Condensing Gas Tankless Water Heaters

All of the Takagi Non-Condensing gas tankless water heaters require to be vented to the outside using 4" stainless steel (AL29-4C) venting.  The Takagi non-condensing gas tankless can be vented horizontally out the sidewall or vertical up through the roof.  The 4" stainless steel venting is a sealed vent and will last a lifetime. 

GlobalTowne carries the full line of Z-Flex Z-Vent 4" stainless steel venting.  The venting comes in various lengths, 90 degree elbows, straight pipe and adapters.  Z-Vent contains a built-in, fail-safe gasket and locking band connection. No sealant is required.

Please call Globaltowne at 888-726-9752 for further questions or to place an order.