The Takagi T-H3J-OS is a condensing unit with a maximum of 160,000 BTU and is ideal for most all residential homes. The T-H3J-OS is an outdoor unit and requires a minimum of a 3/4" gas line. The T-H3J-OS comes set for either Natural Gas (NG) or Liquid Propane (LP). Unlike traditional non-condensing models, condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water. This increases efficiency and reduces emissions -- Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm). The T-H3J-OS is a condensing unit and is very efficient and is all set for installation outdoors. The T-H3J-OS supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems, and/or domestic & heating applications. With gas inputs of 160,000 BTU, the T-H3J-OS can produce enough hot water for 1-2 major applications in most areas. Please see the specifications listed below.
Product Specifications:
Maximum of 160,000 BTU
Energy Star Rated
Energy Factor of 0.95
Maximum flow rate of 6.6 GPM at 35°F temperature rise (5.5 GPM at 55°F rise)
Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
Complies with Ultra-Low NOx regulations of less than 14 ng/J (<20ppm)
Outdoor Unit
Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes
For further questions or to order please visit www.globaltowne.com or call us at 888-726-9752
No comments:
Post a Comment